Engine Seems Loose in Bay
Engine Seems Loose in Bay
Hey guys,
In my '02 Z28 M6 i've noticed it has lost some power, from what I think it is due to a worn down clutch...42,000 miles on it with the occassional burn out and donut. It's primarily my dad's car and he's been on vacation for the past week so I took it out because he was saying he was hearing some weird noises coming from it. My first thought was piston slap but the tapping goes away after warm-up.
So I was looking under the hood as it was warming up and I noticed it had a rough idle(which it partially my fault) but the engine seemed to be moving, or shaking a little too much than I would expect. It seemed like an engine mount had been cracked or something or maybe something happened with the k-member. I dunno.
Also the "change oil" light comes on at start-up and stays on a couple of minutes even after warm-up when driving. Could this be caused by piston slap?
Sorry about the somewhat long post but basically what I am asking here is this:
What could be going on with the engine that it is vibrating that much in the engine bay and could my piston slap being escalating into a worse condition?
Thanks,
~Kevin
In my '02 Z28 M6 i've noticed it has lost some power, from what I think it is due to a worn down clutch...42,000 miles on it with the occassional burn out and donut. It's primarily my dad's car and he's been on vacation for the past week so I took it out because he was saying he was hearing some weird noises coming from it. My first thought was piston slap but the tapping goes away after warm-up.
So I was looking under the hood as it was warming up and I noticed it had a rough idle(which it partially my fault) but the engine seemed to be moving, or shaking a little too much than I would expect. It seemed like an engine mount had been cracked or something or maybe something happened with the k-member. I dunno.
Also the "change oil" light comes on at start-up and stays on a couple of minutes even after warm-up when driving. Could this be caused by piston slap?
Sorry about the somewhat long post but basically what I am asking here is this:
What could be going on with the engine that it is vibrating that much in the engine bay and could my piston slap being escalating into a worse condition?
Thanks,
~Kevin
Re: Engine Seems Loose in Bay
Thanks guys for the advice...I think when this hurricane is gone(i'm in FL) i'll take her to the dealership and see if it's under warranty or how much it would be for them to fix.
~Kevin
~Kevin
Re: Engine Seems Loose in Bay
when you start the car, hold the odometer button iin untill the "change oil" light flashes...then let go.
it resets and you don't have to worry about it. mostly a dumby light
it resets and you don't have to worry about it. mostly a dumby light
Re: Engine Seems Loose in Bay
Originally Posted by teke184
when you start the car, hold the odometer button iin untill the "change oil" light flashes...then let go.
it resets and you don't have to worry about it. mostly a dumby light
it resets and you don't have to worry about it. mostly a dumby light
~Kevin
Thread
Thread Starter
Forum
Replies
Last Post
alex5366
General 1967-2002 F-Body Tech
5
Mar 8, 2015 11:32 AM
Dan_the_ManZ28
LT1 Based Engine Tech
7
Feb 21, 2015 02:01 PM
formula218
Parts For Sale
1
Dec 2, 2014 04:27 PM
Caps94ZODG
Automotive News / Industry / Future Vehicle Discussion
22
Jul 30, 2002 08:45 AM



