LS1 Based Engine Tech LS1 / LS6 / LS2 / LS3 / LS7 Engine Tech

Damn This Works!

Thread Tools
 
Search this Thread
 
Old 05-08-2003, 06:48 PM
  #1  
Registered User
Thread Starter
 
6spdz28's Avatar
 
Join Date: Oct 2002
Location: il
Posts: 69
Damn This Works!

Put on some BMR relocation brackets on my SS today and holy **** it made a big difference. My car being lowered bout 1.5in it made a huge difference. If u dont have i suggest u get them even if your car is not lowered.
6spdz28 is offline  
Old 05-08-2003, 07:20 PM
  #2  
Registered User
 
Ken S's Avatar
 
Join Date: Jun 1999
Location: OR
Posts: 2,368
if I understood how they work correctly, its because your lower control arms are now parallel to the ground again..

putting the relo brackets on a stock height car would make your lca's point downward, which will give you better straight line tractino because when the back of the body wants to shift downward, it will want to force the axle down to the ground too.. but when you take a turn, the body roll will cause the car to oversteer.. something about the geometry of the arms and forces that causes it to happen..
Ken S is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Red Hawk 94
General 1967-2002 F-Body Tech
2
03-18-2019 04:03 PM
cmyname1
New Member Introduction
0
02-16-2015 08:33 PM
phoenix95
General 1967-2002 F-Body Tech
1
01-08-2015 02:44 PM
phoenix95
General 1967-2002 F-Body Tech
2
01-08-2015 09:14 AM
Britbilly
General 1967-2002 F-Body Tech
5
01-07-2015 08:49 PM



Quick Reply: Damn This Works!



All times are GMT -5. The time now is 04:11 AM.