I want to run ls1 injectors in my lt1, I know it can be done.. I've talked to people that have done so. But they don't know the info I need to know..

I'm trying to find out what # per hour a 28.8 pound injector will flow @ LT1 fuel pressure around 44-45 psi - + / - ..... LS1 is around 59 #/hour I believe? So if these injectors would flow at a minimum of 24#/hour at a lower fuel pressure, I would be fine n/a. My motor n/a will be very mild, but will come to live with some nitrous.

Trying to see b/c I don't need much more then something about 400-425 hp n/a . I will be spraying , but with a wet kit. and Will have at least the inline booster to give me the FP I need.

Just looking to see if anyone here has any calculations/calculator they can refer me to , so I can do the math.

THanks
Paul

 

you can find a lot of info here
http://www.rceng.com/technical.htm

 

Very cool info, I will look this over when I have a few mins to let it all sink in! Thanks ... If anyone has any others, please share !!
Happy New Year as well!