Can someone help?
Thread Starter
Registered User
Joined: Jun 2001
Posts: 83
From: Naperville, IL
Can someone help?
I just turned my car (2000 Z28) on a few mins ago and the left turn signal and "ABS NOIP" light came on. I'm like wtf, so I shut it off right away and pop the hood. I find that the ground just right of the air box wasen't fully tight so I tightened it back down and the left turn signal light went away but my "ABS NOIP" light is still on, how can I reset this?
Registered User
Joined: Jan 2003
Posts: 602
From: San Jose, Ca
try driving the car. After I dyno, my inop light is on, but usually when i take it for a short spin right after it goes away. Drive your car around the block and see what happens
Last edited by Aklaim; May 22, 2003 at 04:53 PM.
Thread Starter
Registered User
Joined: Jun 2001
Posts: 83
From: Naperville, IL
Originally posted by Aklaim
try driving the car. After I dyno, my inop light is on, but usually when i take it for a short spin right after it goes away. Drive your car around the block and see what happens
try driving the car. After I dyno, my inop light is on, but usually when i take it for a short spin right after it goes away. Drive your car around the block and see what happens
