hi comaro owners im a new member and need some help
i have a comaro diff its just been rebuilt it was made in 1975 i was told it might be out of a z28 and its ment to be a 8.2 posi traction with the ratio is a3.42,1 i am putting this in a ht monaro with a turbo 400 and a 350 i need to know does any one have a tail sharft to fit this diff with the uni joints at both ends as im in a very remote area call roxby downs south australia and i know nothing about the uni size on the diff cup link and tail sharft uni size can some one please help me as this is my first time with a diff like this

please help me i will b very greatful
cheers shaun

 

What year is your camaro??? This site has general information on the '75:
http://www.camarosource.ca/php/camar....php?year=1975

And this one more information on the '75:
http://www.nastyz28.com/camaro/camaro75.php

 

how much hp are you going to be puttin in front of that th 400 you might wanna think of upgrading the u joints to 1350's they do sell yokes that bolt right in on ur diff