Jdsuperman

I have a 93 Camaro Z28 LT1. I installed a LT4 comp cam and roller rockers, new lifters stock, and new springs, a little heavier duty with 7.050 pushrods. My question is, the roller rocker wheel that sits on the top of the valve can manually move side to side after they been set! I can grab the rear end of the rocker and slide it left and right. Is that normal? I have a video but don’t know how to post.

Injuneer

Are these self-aligning or non-self-aligning rockers? Which Comp Cams roller rockers?