On the shifter stick, the 2 bolts that hold the stick on, Mine keep viberating loose and the stick starts wobbling...

Have anyone of you had this same problem?

What can I do to fix it?

Can I simply locktite these 2 bolts with the shifter still installed ??

Thanks

 

You don't need to use Loctite but some guys do. I just crank 'em down good and tight.

 

I used locktite. They havent loosened up a bit

 

Same thing happened to me a few months ago. Used some threadlock and no problems since.

 

Cool,

Thanks for the fast reply's guys ....

Is it OK to tighten these 2 bolts down with the shifter installed?

I'm gonna have to get some locktite later... What do you suggest?

This is the 4th time these bolts loosen'd on me.... I dont want to do it no more, so this locktite should be strong, lol...


Ahh the love of these cars...

 

I just bolted my bolts down really tight and I haven't had any problems. If you're going to use Lock-Tite...get it in medium strength (blue).

 

yea hype i have the same problem on my pro 5.0 they keep coming loose ever month or 2

 

I'm gonna try the lock-tite tommorow and I'm sure that'll fix the problem.

Thank you guys for the advice !!!

 

Mine did that a few times during the first couple of months i had it. Then one day i got pissed off and torqued the **** out of the bolts and it has held fine for the last 9 months or so. No locktite, just torque. Come on boy, put some elbow grease into it

 

Do you have the lock washers on the bolts? If not, add some lockwashers.

I don't loctite mine, I just use the lockwashers, and mine never come loose.