General 1967-2002 F-Body Tech For general F-Body discussion that does not fit in any other forum.
For F-Body Technical/Information Discussion ONLY

please help me out

Thread Tools
 
Search this Thread
 
Old 05-06-2005, 01:44 PM
  #1  
Registered User
Thread Starter
 
SShottie20's Avatar
 
Join Date: Jan 2005
Location: Clearwater, Fl
Posts: 16
Exclamation please help me out

I want to peice out my 98 camaro Z because i found out the firewall was damaged , it has a LS1 with 78000 miles on it, with a new alternater and water pump. it has t-tops, tan leather, crome rims, and body kit. im not sure how much to ask for the engine or tranny ect. could you please help me out, i will sell it as a whole if the price is right.
SShottie20 is offline  
Old 05-06-2005, 02:29 PM
  #2  
Registered User
 
myslowcamaro's Avatar
 
Join Date: Feb 2005
Location: fairless hills pa
Posts: 1,326
Re: please help me out

take a look at ebay and see what they are going for on there. id say 2000-3000 for both the engine and tranny if its stock. thats fair market for my area, but some on here will say its cheap, others will say way too high. call around and see what your local salvage yards get.
myslowcamaro is offline  
Old 05-09-2005, 01:07 AM
  #3  
Registered User
 
fredmr39's Avatar
 
Join Date: Aug 2003
Location: Chicagoland, IL
Posts: 1,397
Re: please help me out

Yea...there are a lot of factors that will go into determining its value, but aim high - see how many offers you get -- if below sale price, see what the best offers are, etc..
fredmr39 is offline  
Old 05-09-2005, 04:51 PM
  #4  
Registered User
Thread Starter
 
SShottie20's Avatar
 
Join Date: Jan 2005
Location: Clearwater, Fl
Posts: 16
Re: please help me out

thank you very much for your help
SShottie20 is offline  
Old 05-09-2005, 06:11 PM
  #5  
Registered User
 
Compstall's Avatar
 
Join Date: Dec 2000
Location: Tacoma, WA, USA
Posts: 2,442
Re: please help me out

If you post what you have in the FS forum and all the local regional forums in this and other F-body sites I think you'll do fine. Personally I wouldn't take anything less than $2,000 for the engine and PCM by itself.
Compstall is offline  




All times are GMT -5. The time now is 10:18 AM.