i have a 93 z28a4 and im trying to figure out what parts i should get. im trying to reach 13 flat or so for 1/4. no nitrous please. thanks alot

 

I would say the follwing things would get you to a 13 flat

1. Cat-back exhaust
2. Cold Air Intake
3. Headers
4. 3,000 RPM tourque Converter
5. Transgo shift Kit
6. Radials/Slicks
7. Programmed PCM
8. Weight reduction, take out all you don't need
THIS SHOULD GET YOU PRETTY CLOSE TO THE TIME YOU ARE LOOKING FOR.... BUT IF YOU WNAT A LITTLE MROE KICK, THEN GET A KILLER CAM SETUP


HOPE THIS HELPS

 

i would also look into some lower control arms and maybe relocation brackets to get a good launch.

other things to look into would be and electric water and gears

 

Slash the cat-back, get a cut out...its cheaper, yea...unless you want a cat back. Just my advice

 

ok whats a cut out?

 

www.dmhperformance.com make electronic cutouts. Go there, you will get the idea.