I am going to replace the motor mounts on the car in sig. I checked at advance, napa, etc. They sell either the whole mount which are $150 per side but I have seen just the rubber pieces for 20ish each also. Which would I need to get?

Reason is my headers have started to rub against the k member on the drivers side and against the inner fender on the passenger side. So I have to take the headers back out to "fix" the problem. I should have replaced the mounts when I installed the headers in the first place but lesson learned .

 

All you really need are the rubber/prothane parts, but you'll have to drill/grind out the rivets to replace them.

 

That don't sound too bad. Thanks!