How to hot wire???
How to hot wire???
I think my Ignition is bad. What happens is, when I turn the key to the on position, only the radio will come on. The dash lights do not light up. The headlights work so does the horn, etc. But the car won't start. It won't even turn over. I need to limp this car home. Any suggestions?
Re: How to hot wire???
Originally Posted by jssws-6
I little more help than that please. Elaborate thanx
there are a half dozen wires that need to get power,. along witht the start wire, plus, the key needs to be turned on(to unlock wheel, and have the VATS signal OK)
easiest way is a new/working switch, plugged into the harness, switch is mounted on top of the column, halfway down to the firewall
Last edited by Dave89IROC; Aug 21, 2006 at 04:32 PM.
Re: How to hot wire???
Originally Posted by jssws-6
Thats alot mre help thanx. The switch is that a gm only part, a local parts store would'nt have this would they
Re: How to hot wire???
I replaced mine following shoebox's site:
http://shbox.com/ignsw/ign_switch_repl.html
http://shbox.com/ignsw/ign_switch_repl.html
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM



