General 1967-2002 F-Body Tech For general F-Body discussion that does not fit in any other forum.
For F-Body Technical/Information Discussion ONLY

help identify these connectors - under dash

Thread Tools
 
Search this Thread
 
Old Oct 17, 2009 | 02:03 PM
  #1  
OutKast's Avatar
Thread Starter
Registered User
 
Joined: Jun 2001
Posts: 425
From: Lakeland, FL
help identify these connectors - under dash

Working on getting the dash back in a all wired up but came across these two plugs that I can't figure out where they go. They are wrapped in pink tape. It's a small Y harness that plugs into the main dash harness on the driver's side near the steering column.

I've searched all over including shoebox's site as well as my helm book...no luck


Last edited by OutKast; Oct 17, 2009 at 04:15 PM.
Old Oct 17, 2009 | 03:59 PM
  #2  
rclearyiii's Avatar
Registered User
 
Joined: Jul 2008
Posts: 386
From: Raleigh, North Carolina
Out...if you could post some pics it might would help.
Old Oct 17, 2009 | 04:15 PM
  #3  
OutKast's Avatar
Thread Starter
Registered User
 
Joined: Jun 2001
Posts: 425
From: Lakeland, FL
pic should be fixed now
Old Nov 15, 2009 | 11:49 PM
  #4  
Friday13th's Avatar
Registered User
 
Joined: Feb 2001
Posts: 81
From: Reading, PA, USA
They look like brake switch connectors. Check the brake pedal.
Old Nov 17, 2009 | 03:06 PM
  #5  
Spartan7's Avatar
Registered User
 
Joined: Mar 2009
Posts: 171
Originally Posted by Friday13th
They look like brake switch connectors. Check the brake pedal.
It's the y-harness for the cruise control cancel switches on the brake and clutch pedal.
Old Nov 19, 2009 | 12:09 AM
  #6  
madhatter's Avatar
Registered User
 
Joined: Dec 2001
Posts: 726
From: Glendale, AZ
Originally Posted by Spartan7
It's the y-harness for the cruise control cancel switches on the brake and clutch pedal.
Yep the impossible to find, discontinued harness. Wanna sell it?
Old Nov 19, 2009 | 01:50 AM
  #7  
Spartan7's Avatar
Registered User
 
Joined: Mar 2009
Posts: 171
Originally Posted by madhatter
Yep the impossible to find, discontinued harness. Wanna sell it?
Just make your own. I went to a scrap yard and cut the cruise switch harness out of an auto car, then spliced it to the one in my car in parallel.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff1904
General 1967-2002 F-Body Tech
5
Jun 5, 2016 05:00 PM
Double aught
LT1 Based Engine Tech
7
Oct 2, 2015 11:29 PM
Greg88
LT1 Based Engine Tech
2
Sep 20, 2015 07:14 PM
Rod Bender
Fuel and Ignition
25
Sep 16, 2015 01:47 PM
Daluchman1974
Cars For Sale
1
Sep 11, 2015 06:12 AM




All times are GMT -5. The time now is 12:03 PM.