Head lights and High beams
Thread Starter
Registered User
Joined: Oct 2014
Posts: 251
From: CALI.L.A.- Las Vegas
Head lights and High beams
Well I have a random problem with my head lights and high beams. High beams nor my headlight are coming on, on my way home I started to smell burning plastic (enough to burn my eyes and nose) and my heads lights went out, all my other lights work with no problem . I have tested with a test light and the lights are not getting power put I have power at the switch. My question is how do I test or know if switch is burned or if I have a short in the lead ? Thanks in advance
Administrator
Joined: Nov 1998
Posts: 71,116
From: Hell was full so they sent me to NJ
Re: Head lights and High beams
Does the headlight switch have power both in (red wire/pin J) and out (yellow wire/pin E), in the on position?
If you have power on the out side of the switch, there is nothing but yellow wire between the switch and the headlights. Check for 12V at the yellow wire at the low beam headlights. If no power, wire is open. Measure resistance of the yellow wire between the switch and the headlight to verify.
Courtesy of Shoebox - 94 should be similar
http://shbox.com/1/headlight_chevy_1995.jpg
If you have power on the out side of the switch, there is nothing but yellow wire between the switch and the headlights. Check for 12V at the yellow wire at the low beam headlights. If no power, wire is open. Measure resistance of the yellow wire between the switch and the headlight to verify.
Courtesy of Shoebox - 94 should be similar
http://shbox.com/1/headlight_chevy_1995.jpg
Thread Starter
Registered User
Joined: Oct 2014
Posts: 251
From: CALI.L.A.- Las Vegas
Re: Head lights and High beams
what are the p100 on shbox headlight diagram ? and are there any grounds for the headlights if so where is the location ?
Last edited by blac94Z; Jan 13, 2016 at 11:52 AM.
Registered User
Joined: Aug 2009
Posts: 771
From: las vegas
Re: Head lights and High beams
Well I have a random problem with my head lights and high beams. High beams nor my headlight are coming on, on my way home I started to smell burning plastic (enough to burn my eyes and nose) and my heads lights went out, all my other lights work with no problem . I have tested with a test light and the lights are not getting power put I have power at the switch. My question is how do I test or know if switch is burned or if I have a short in the lead ? Thanks in advance
Last edited by 94Z28LS1toLT1; Jan 13, 2016 at 04:29 PM.
Administrator
Joined: Nov 1998
Posts: 71,116
From: Hell was full so they sent me to NJ
Re: Head lights and High beams
P100 is a sheet metal pass through with a grommet.
Grounds are "G"
Connectors are "C"
Splices are "S"
Note that there is a connector C200D between the light switch and G100.
The headlight grounds are at the bottom of the diagram G105 and G106. The symbol means they are chassis grounds.
Grounds are "G"
Connectors are "C"
Splices are "S"
Note that there is a connector C200D between the light switch and G100.
The headlight grounds are at the bottom of the diagram G105 and G106. The symbol means they are chassis grounds.
Registered User
Joined: Aug 2009
Posts: 771
From: las vegas
Registered User
Joined: Aug 2009
Posts: 771
From: las vegas
Thread
Thread Starter
Forum
Replies
Last Post
