Ok, at the end of the nice summer weather last year I installed a new adjustable panhard rod with ALOT of help from you guys, nice weather has started and now i'll get to drive it, buit the instructions said to give it 2-3 shots of a silicon based grease. Well i've had the grease gun for a while and today I went to look for grease that fits it. The only grease I found in a cartridge form was marine grease. It doesnt list what is in it, so I need to know if marine grease is ok to use.

Thanks!

 

That's what I use, every oil change.

 

So I should add a few squirts every oil change?

I should probably learn how to change my own oil lol

 

I ordered the silicon based grease directly off of the Spohn website and bought a seperate grease gun as well. I don't take chances after all the money that has been spent on just suspension parts. www.spohn.net

 

http://www.spohn.net/category.cfm?categoryid=1057

That one?

 

Yep, thats the stuff.

 

You got the grease gun there too? I cant find it in the links.

 

No, I bought the grease gun from Auto Zone. You can get those just about anywhere.

 

Ok now I have the grease in the gun, tried quirting it and it didnt come out, does it only work when its on the little "nubby things" Will it ooze out a little?

Thanks.

 

Maybe you dont have the cartridge set up right in the gun. It should squirt regardless of whether it is connected to the "zerk" fitting or not.

 

Ah, ZERK!

Well I pushed it into the zerk fitting and it seems to have worked, theres a little bit on the tip of the zerk.

The grease had an arrow pointing to one end and it said towards gun head and I removed the seal, stuck it in.