I just want to make sure, I don't want to assume anything.

I'm taking the lines I pulled outta the JY to a brake shop to have them extended, with the ends flared w/ nuts.

Going to get ~13" added to each line. The first guy I took it to said that I had neither a double nor single flare, but a "bubble" flare, WTF is that? Is that what I have?

This is the REAR brake line:
http://paradox.shacknet.nu/dave88lx/formula/flare1.jpg

http://paradox.shacknet.nu/dave88lx/formula/flare2.jpg

http://paradox.shacknet.nu/dave88lx/formula/flare3.jpg

Here's the ABS controller I guess it is. I would ASSUME THAT Front Left is FL, Front Right is FR, and the rear single line goes into the RR port? If someone could confirm or double check for me it'd be much appreciated!

http://paradox.shacknet.nu/dave88lx/.../abs-port1.jpg

http://paradox.shacknet.nu/dave88lx/.../abs-port2.jpg

http://paradox.shacknet.nu/dave88lx/formula/abs.jpg

Thanks!

 

Yep that's a bubble flare. Kinda the first part of a double flare.

You have it correct. Here's a picture of mine before I removed it.
http://www.pharmacy.arizona.edu/staf.../absblock3.jpg