I have gremlins who appear periodically and it is killing me.

This is a 96 Camaro with bolt ons (incl headers) and a tune via LT1 Edit.

When it goes haywire it goes haywire. First, the switch in the drivers door to the passenger window flaked out. They I lost the passenger side headlight. I replaced. Then I threw code for the O2 sensor on the passenger side. And the radio is turning on and off (not factory). Now the window is dead on the passenger side from the driver switch; passenger door switch still works.

Any ideas? It keeps happening every 6 months or so and I want to kill it.

Thanks all.

 

An update.

When I cranked the car to go home, the SES light was still on. I hit the window switch and it responded no problem. Shortly thereafter the SES light went out.

WTH?

 

What does a code scan say?

 

P0141 when I scanned it. It always shows that code on that sensor when it does this.

Go figure today the pass window does not work from either the driver or pass door switch.

I never did change the BCM because it went away for a very long time coupled with hitting a deer. Would the BCM cause headlights and O2 flakiness?