Im swaping a 94lt1 into a 96 body. All wiring is being swapped, this included the dash harness. I have diabled the PCM (94) from VATS so it doesnt recognize it anymore. Is there anything else I have to do. Im using a '96 key. The '96 BCM is being swapped for the '94. Ive been searching here and www.shbox.com and am totally stumped.

 

As it says on my site, you will probably have to bypass the TDR to get it to crank. You seem to have the fuel enable signal already taken care of by your PCM reprogramming.