My driver side window simply falls when you push the down button, I otook off the door panel and discovered that I will need both channels and the rollers as well as the piece of metal that is riveted on the back part of the window. I need part numbers if anyone can help me. Please and thanks, its gettin hot and I cant roll down my window


Can I get the part numbers for these too?
http://24.196.89.146:2980/webshare/hardware1.jpg

 

If you want only my help, email me. If not, don't limit your responses by putting my name in the subject. Always provide some car info when you want part numbers. It may not matter in this case, but who is going to look up part numbers if they don't know anything about the car?

 

Why do you need the #'s anyway? Just call up Jason or Dal and tell them what you need.

 

Sorry its a 95 Camaro...I apologize

 

Channel that attaches to the LH window glass GM PART # 16625875

Rear vertical channel GM PART # 16629042

Rivet GM PART # 12338153

Rollers come attached to the window regulator GM PART # 10305686 LH

 

or, you could just buy the whole mess on Ebay. I've seen several entire track sets sell for around $30 each. I would recommend doing that before you spend alot of money on new parts.

 

Here are the regulators for $9 - $30 but it does not include the tracks. Are the tracks broken?

http://cgi.ebay.com/ebaymotors/ws/eB...975633489&rd=1

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

Here is a window with the track still attached. The price is too high. I've seen them sell for $35.

http://cgi.ebay.com/ebaymotors/ws/eB...category=33684

 

Wow! Thanks everyone!