My driver side window is starting to flake out on me. Sometimes when i roll it down it take about 10 min to get it back up. It will only go up 2 inches at a time. Then i have to wait a few sec and then try again...WHY, and how do i fix? I hate Mondays!

 

Sorry, but you have to get a new motor... ~$60-70 at Advance but muuuch cheaper on Ebay, for a set of two! I don't know about reliability of the Ebay ones tho... Replacement instructions via Shoebox's site are found here: http://shbox.com/page/windowmotor.html

 

The 2" at a time has something to do with the motor heat sink. As stated above, you need a new motor.

 

Happens on all 93-02 F-bodies. They have complete garbage power windows.

Replace the motor.

 

Ya know when i think of Heaven i think of CamaroZ28.com I think i am going to get really familiar with my car being that i am in England and i am not paying some fat fish and chip eating bugger to charge me 200 pounds/ 400 bucks to replace my motor.. Only one way to learn right? Thanks again Gents!

 

Learn all you can, save as much money as you can.

 

This is not an engine tech question so I'm going to move it to general tech.

 

Ive owned 2 W-bodies and an F-body. Both W-bodies started doing just this when they were about 10 years old. My 99 camaro is just starting to do it now.

Guess these things only last about a decade.

 

You will need a power drill, both to drill through the fiberglass panel and the rivets holding the motor to the regulator. Courtesy of Shoebox:

http://shbox.com/page/windowmotor.html