135-INJ-L79FM-8 Racetronix Flow-Matched 79# Style Fuel Injectors (Set of 8)
-Static Flow Rate: 76.65 lb/hr = 9.67 g/s = 846 cc/min (+/-4%)
-Coil Resistance: 12.2 Ohms (+/-0.35 Ohms) (This high-impedance injector will work with all factory ECM/PCM injector drivers)
-Dynamic Flow @ 2.5ms PW @ 100Hz: 16.88 mg/pulse +/-10% @ 2.5ms PW @ 100Hz
-Gain: 0.11ms/mg, Offset: 0.055ms, Turn on time: 1.14ms @ 14VDC, Turn off time: 0.85ms @ 600KPa
-Dynamically flowed and grouped to within 1% tolerance using Racetronix custom injector flow bench


JW if anybody is using them.
Building a MP T70 turbo setup and am wondering if i should go with 60# siemens injectors, or the 79# racetronix for safe measures

 

I think I might get them. I'm shooting for 700rwhp and everyone I talked to says 60's wont cut it at that power level. How much power are you tryin to make?

 

well, im going for 650RWHP or so and wasnt sure if 60#s was enough