injectors
The LS1 injectors are flow rated at 58psi, and the LT1 injectors at 43.5psi. That means that if you run a 26 #/HR LS1 injector in a lower pressure LT1 fuel system, is will only flow 22.5 #/HR. They will fit into the LT1, but you would either need to raise the fuel pressure to get them back to the stock injector rating (24.9 #/HR) or have your PCM programmed with the smaller injector size.
Thread
Thread Starter
Forum
Replies
Last Post
autoxr166
General 1967-2002 F-Body Tech
0
Sep 25, 2015 04:21 PM



