on a 94 camaro v6 it has 2 sensors, one is a 24x ref and the other is a 3x ref.

now if the the 3x is not hooked up or damaged it will not throw a spark at the wire correct??? cuz right now im getting no spark.

also could someone give me a pic of the 24x sensor wiring cause i had to wire it up myself the connectors on the harness were cut out.

thanks all help is greatful.

 

According to the wiring diagram in my Chiltons (always a crap shoot on accuracy), there are 3 wires that connect to the 24X optical sensor. Pink is 12V power from fuse #11 (Ignition) in the underhood electrical center; brown/white is the signal wire, to pin C25 of the PCM; pink/black wire is the ground to pin C18 on the PCM.