Forced Induction Supercharger/Turbocharger

stock tb and sc

Thread Tools
 
Search this Thread
 
Old Apr 9, 2008 | 10:20 PM
  #1  
Blownbird355's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 564
From: Huntington, W.V. 25701
stock tb and sc

My car runs the times in sig just wanted to get everyones opinion on wether or not the stock throttle body and 1 5/8's macs are holding me back. Car put down 460hp on Dynojet. ported heads, 9psi boost no cooler,cc 305 cam

Last edited by Blownbird355; Apr 11, 2008 at 05:43 PM.
Old Apr 10, 2008 | 08:26 AM
  #2  
jsetzer's Avatar
Registered User
 
Joined: Feb 2004
Posts: 2,182
From: Moore OK
Doesn't seem too bad for whats done. I would think a colder charge (cooler or meth or something) would do more for you than the TB.

Guessing the S trim is maxed out? Best answer is always more boost
Old Apr 10, 2008 | 03:24 PM
  #3  
Blownbird355's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 564
From: Huntington, W.V. 25701
No S-trim isn't maxed but my 48 lbs inj are. Still stock pullies on the S-trim.
Old Apr 11, 2008 | 05:45 PM
  #4  
Blownbird355's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 564
From: Huntington, W.V. 25701
Any other opinions? Seems some others are running better or putting down more hp compared to mine but, similar mods.
Old Apr 11, 2008 | 07:09 PM
  #5  
95 Silver TA's Avatar
Registered User
 
Joined: Apr 2001
Posts: 1,132
From: Florida
I'll be the first to admit, I am not as knowledgeable as most here but your ET and MPH seem pretty good for what you have done (unless the car is completely gutted weight wise).

I think may be a cooler of some sort may help too. What are your current IAT at 9#?

I have been out of the car scene/thing for a while (4 years to be exact) but I remember reading something here that Non Intercooled boost usually yields about 15HP per # of boost and an intercooled boost may allow 20HP per # of boost (maybe more pending increase in timing).
If your IATs are high, a cooler could (in theory) gain another ~45HP that what you are currently (maybe more).

Thx,
Claude

Last edited by 95 Silver TA; Apr 11, 2008 at 09:58 PM.
Old Apr 12, 2008 | 10:02 AM
  #6  
Blownbird355's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 564
From: Huntington, W.V. 25701
I believe the IAT's lat time out were getting to at least 160 so I know it is hurting me. I have a a/w cooler I just need to get it going with an exchanger and pump.
Old Apr 12, 2008 | 05:25 PM
  #7  
GMRL's Avatar
Registered User
 
Joined: Mar 2005
Posts: 307
Originally Posted by Blownbird355
I believe the IAT's lat time out were getting to at least 160 so I know it is hurting me. I have a a/w cooler I just need to get it going with an exchanger and pump.
Do you mean you have it in your possesion but its not installed?
Or its in the vehicle but does not have an exchanger and pump?
If so is there liquid in it?

That would definately hurt you, heat soak FTL.
Old Apr 13, 2008 | 09:36 AM
  #8  
Blownbird355's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 564
From: Huntington, W.V. 25701
No not on the car just in my pocession.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HectorM52
Parts For Sale
26
Jul 30, 2017 11:46 AM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
canbaufo
Parts For Sale
7
May 25, 2015 12:01 PM
DirtyDaveW
Parts For Sale
1
Mar 15, 2015 07:01 PM
MyShibbyZ28
Parts For Sale
0
Feb 14, 2015 12:05 PM




All times are GMT -5. The time now is 01:47 PM.