Silicon reducers for relocated Maf?
#1
Silicon reducers for relocated Maf?
Hi. I need to relocate my Maf to after charger placement. How did you guys do it?
I figured silicon reducers but not sure. I have a p600b kit if it matters. Using the stock MAF and the 3" inlet pipe that came with the kit, what is the best way to connect?
Thanks.
I figured silicon reducers but not sure. I have a p600b kit if it matters. Using the stock MAF and the 3" inlet pipe that came with the kit, what is the best way to connect?
Thanks.
#2
Look here:
http://www.turbohoses.com
http://www.turbohoses.com
#3
Heres a pic of mine:
http://images.cardomain.com/member_i...29_65_full.jpg
And a little write up I did is in on this page (you will need to scroll about half way down).
http://camaroz28.cardomain.com/memberpage/342629/3
Thx,
Claude
Last edited by 95 Silver TA; 04-19-2004 at 01:47 PM.
#4
http://www.atpturbo.com/Merchant2/me...y_Code=SIL-TRN
I'd try here first!
Bill
#5
NOW you tell me! I thought TurboHoses was a little pricey. Man, that chaps me. Oh well, live and learn. Thanks SMOKNZ. And I'm sure that slimdawson thanks you for saving him $40.00.
Last edited by David94TA; 04-19-2004 at 04:23 PM.
#6
I actually just stumbled on the webpage a few weeks ago when LT1RX7 posted about a oil line restricter they sold. I followed the link and checked out what else they had to offer. Sorry I didn't know about them in the past!
Bill
Bill
Thread
Thread Starter
Forum
Replies
Last Post
Nayr
LT1 Based Engine Tech
7
03-03-2023 08:34 PM