I have a 93 M6 with a 355ci with forged pistons and stock crank and rods, Ported heads and a xe 230/236 544/556 on a 112lsa.

I'm considering purchasing a Porcharger w/intercooler. I know I would need a new fuel pump and Injectors what else would I need?

How much PSI should I try and run? How hard would it be to get a 93 to run with a cam and boost? Or should I just slap a 150 shot on it and call it a day.

Thanks for the help

 

What compression do you have?

 

I would think your motor could hold 6-8psi fairly well. I would only hope you at least had some upgraded rod bolts on the stock rods. As for the tune, you'd have to have another custom chip burned for the boosted application.

 

the compression is stock.

 

Agree
If you dont plan to lower youre comp and run more boost i suggest N2O, sure you have to fill the bottle, keep it warm,etc but it should be alot cheaper and i guess it will preforme better times on the track....

Both ways are possible, its all about youre goal and future plans.

 

My main concern is that the 93 SD ecm will not work well with boost. Has any one boosted a stock 93 SD ecm with out trouble? I would love to blow this motor up and thow a 383 with #25psi in.

 

Do you guys think I could run like 8-10PSI intercooled with a dyno tune with my set up?