It getting down to it and I need to find cam. What do you guys think of this.

219/219 .560/.560 HR112

http://www.lingenfelter.com/store/l210035087.html

Ive done a lot of searching and just cant decide, dont think Ive seen anybody that is using this cam though. Think this would be a good choice.

I have log manifolds, plan on running 10-15psi with a t67 once my new motor is done.

I would like to get 550-600 at 15 psi.

 

Im not expert by any means, but if the cam manufactuer marks that as an NA cam, and not a forced induction or nitrous cam, maybe you should look at different "forced induction" style cams?

 

From the research I have dont this looks to me like It might be an OK Turbo cam.

Has decent lift numbers and an over lap of -5*

Anyone else have any thoughts on this?

 

It will make the power. It will sound like stock. Me i would like something a bit wilder. There is a video of a guy with a 76mm Turbo and a Blower cam 23x X24X. If I were to go though all that trouble.... that would be my baseline. 700+HP!

 

Anybody with some experiance want to talk me out of this before I buy it?

 

Ask Scott Hewitt he may be able to talk you out of it.http://www.exoticperformanceplus.com...MOV00004-1.flv