Bypass Valve for ATI D-1SC
Bypass Valve for ATI D-1SC
Having donated mine to a friends (you know who you are), I need to know if anyone happens to know what the price of one new is or if ATI even sells them alone.
I've decided to not go with the ATI Race bypass valve quite yet to simplify the installation since I'm going to be doing it myself. Down the road once the aftermarket computer goes in and the boost gets turned up, different story.
I've decided to not go with the ATI Race bypass valve quite yet to simplify the installation since I'm going to be doing it myself. Down the road once the aftermarket computer goes in and the boost gets turned up, different story.
Yes, If you're just missing the valve assembly itself and still have the hose and discharge filter then you just need to order # AV005A-001
If you need everything to plumb the valve then order 3GASS-004 $215.00
If you need everything to plumb the valve then order 3GASS-004 $215.00
I have one that I'm not using... I'll snap a couple pics if you're interested. I got the stuff used with a twin high-flow setup, but never used the bypass valve, so it might not be exact.
$90 shipped with:
approx 12" section of 2.5" tubing with the exit for the valve on it
90* rubber elbow and 4 hose clamps -- i think the elbow has been trimmed
the valve
and I can even throw in some silicone vacuum line if needed.
edit/updated... looked outside and found the stuff I have. Let me know if you want pics.
$90 shipped with:
approx 12" section of 2.5" tubing with the exit for the valve on it
90* rubber elbow and 4 hose clamps -- i think the elbow has been trimmed
the valve
and I can even throw in some silicone vacuum line if needed.
edit/updated... looked outside and found the stuff I have. Let me know if you want pics.
Last edited by Roadie; Jan 19, 2007 at 09:44 AM.
I have one that I'm not using... I'll snap a couple pics if you're interested. I got the stuff used with a twin high-flow setup, but never used the bypass valve, so it might not be exact.
$90 shipped with:
approx 12" section of 2.5" tubing with the exit for the valve on it
90* rubber elbow and 4 hose clamps -- i think the elbow has been trimmed
the valve
and I can even throw in some silicone vacuum line if needed.
edit/updated... looked outside and found the stuff I have. Let me know if you want pics.
$90 shipped with:
approx 12" section of 2.5" tubing with the exit for the valve on it
90* rubber elbow and 4 hose clamps -- i think the elbow has been trimmed
the valve
and I can even throw in some silicone vacuum line if needed.
edit/updated... looked outside and found the stuff I have. Let me know if you want pics.
I am the dude who accepted the donation
. Fastbird, let me know how much I owe you when you pick what you want.
BTW, I am also a KC-10 Boomer. Here's a pic (unless you join and become a Boom Operator like us, this is probably the best you will get).
. Fastbird, let me know how much I owe you when you pick what you want.BTW, I am also a KC-10 Boomer. Here's a pic (unless you join and become a Boom Operator like us, this is probably the best you will get).
My apologies on the delay... I was at a UMP racing awards banquet over the weekend. 3 days of non-stop human self-abuse with alcohol. 
The pics are kinda big, so I won't post them in-line.
http://www.lt1.org/other/jpg/bypass1.jpg
http://www.lt1.org/other/jpg/bypass2.jpg

The pics are kinda big, so I won't post them in-line.
http://www.lt1.org/other/jpg/bypass1.jpg
http://www.lt1.org/other/jpg/bypass2.jpg
Thread
Thread Starter
Forum
Replies
Last Post
350350
Fuel and Ignition
14
Aug 11, 2015 12:03 PM
RX Speed Works
Supporting Vendor Group Purchases and Sales
0
Jul 24, 2015 02:25 PM



