Are there any manufacturer of true dual exhausts other than Bassani. What ever happened to the Grotyohahn exhausts?

 

Only Texas Speed for the LS1 guys as far as I know. LT1 is pretty much DIY.

 

yea go to a decent exhaust shop and tell em what you want, it isnt as expensive as you'd think for them, and if you dont have the pipe benders and welding experience you won't have a decent exhaust anyway

my custom duals cost me $350 for everything headers back

 

texas speed has a true dual setup for LT1's as well thats 400ish
be careful what exhaust shop you go to, as most of them will use crush bends.

 

Any over the axle true duals other than Bassani?

 

go custom baby!

 

install cut outs if you're worried about crush bends, then you get your true dual sound on the street and have more flow than you'll need

 

With so many different types of TAs, etc it's really beneficial to go the custom route, but its not cheap...I have a Spohn cross brace mounted TA and a stainless 3" true dual system with an X and Edelbrock 304s dumped is being fabricated/installed now...Its a bit $$$ but it'll have ground clearance and no fitment issues...

--Alan