Pacesetter Lt Install?
Pacesetter Lt Install?
i need a list of everything ill need to install these.like o2 sims,tuning,what?i need to see how much $$$$$$ ill need to make the install complete,so i can do it in one shot.thanks.oh its a 96z m6. and im keeping the emissions hookups except cats.
yes, or have them tuned out via the PCM.
Your going to need: Headers, ORY (or Y w/ Cats), Header Gaskets, Collector Gaskets, Header Bolts, Collector Bolts, Plugs/Wires (I suggust changing them while your in there), o2 extensions, o2 sims, and you may want to change the o2's while your at it.
Your going to need: Headers, ORY (or Y w/ Cats), Header Gaskets, Collector Gaskets, Header Bolts, Collector Bolts, Plugs/Wires (I suggust changing them while your in there), o2 extensions, o2 sims, and you may want to change the o2's while your at it.
Here is a list of what I used for my install:
ARP bolts
Fel-Pro gaskets (won't apply to you if your headers came with copper gasket)
2 12" 02 extensions
2 O2 simulators
A couple cans of PB blaster, shop rags, cable ties, ect
OTVC loom kit
OTVC wire set
3" band clamps ( I used these instead of the u-clamps supplied with the kit to prevent crushing and distorting the pipes.
New plugs and 02 sensors.
ARP bolts
Fel-Pro gaskets (won't apply to you if your headers came with copper gasket)
2 12" 02 extensions
2 O2 simulators
A couple cans of PB blaster, shop rags, cable ties, ect
OTVC loom kit
OTVC wire set
3" band clamps ( I used these instead of the u-clamps supplied with the kit to prevent crushing and distorting the pipes.
New plugs and 02 sensors.
ok this is what I have so far I hope I'm not missing anything if you see something let me know
set - Pacesetter Long Tube Headers (coated w/egr/air)
set - Pacesetter Off road Y-pipe
3 - 3" exhaust clamps
2 - hanger bolts/nuts
6 - EGR/AIR bolts
12- header bolts w/washers
2 - header gaskets
2 - air gaskets
1 - EGR gasket
2 - o2 extensions
2 - o2 sims
8 - NGK v-series (tr55)
1 - set MSD wires
1 - Bosch oil filter
1 - fuel filter
6 - Qts Castrol GTX high mile 5w-30
1 - glowshift oil filter sensor adaptor
1 - glowshift oil temp gauge w/sensor
1- -glowshift trans temp w/sensor
1 - glowshift air/fuel ratio gauge
4 - jack stands
2 - jacks
2 - work lights
2 - cans PB penetrating oil
all my tools (esp 10mm and alot of extenders as well as patience)
1 - glowshift decal
2 - pacesetter decals
2 - Hooker decals
1 - set red bawls

if I should be forgetting something let me know I'm attacking this job next thursday
set - Pacesetter Long Tube Headers (coated w/egr/air)
set - Pacesetter Off road Y-pipe
3 - 3" exhaust clamps
2 - hanger bolts/nuts
6 - EGR/AIR bolts
12- header bolts w/washers
2 - header gaskets
2 - air gaskets
1 - EGR gasket
2 - o2 extensions
2 - o2 sims
8 - NGK v-series (tr55)
1 - set MSD wires
1 - Bosch oil filter
1 - fuel filter
6 - Qts Castrol GTX high mile 5w-30
1 - glowshift oil filter sensor adaptor
1 - glowshift oil temp gauge w/sensor
1- -glowshift trans temp w/sensor
1 - glowshift air/fuel ratio gauge
4 - jack stands
2 - jacks
2 - work lights
2 - cans PB penetrating oil
all my tools (esp 10mm and alot of extenders as well as patience)
1 - glowshift decal
2 - pacesetter decals
2 - Hooker decals
1 - set red bawls

if I should be forgetting something let me know I'm attacking this job next thursday
Last edited by Red Devil 99'; Jun 10, 2008 at 11:15 PM.
Thread
Thread Starter
Forum
Replies
Last Post
drptop70ss
Parts For Sale
2
May 4, 2015 08:22 PM



