It's in the sig. Definitly be in the 10's by the in of the year.

Randy

------------------
94Z 355 cid Hughes performance TH350 with 4000 TC, ported and polished 2.00, 1.57 valve heads, ported intake, 52mm TB, Bullet custom grind cam, Comp cams R series lifters, Hooker LT's, custom dual exh. with dynomax bullet mufflers,CSI elec. WP,MSD Digital 6+ ign,Autogage 5" monster tach with shiftlite,AC delete pulley, CC pro mag 1.6 rockers, Forged Ross pistons, 11:1 cr,B&M Pro stick shifter, eagle rods, polished stock crank,balanced rotating assembly , 24lb SVO injectors,Nitrousworks wet kit, AFPR, pcmforless custom program, alston SFCs, boxed LCAs with relocation brackets, tubular panhard rod,chassis engineering 8-point rollbar with 5-point harness, BMR Trac Pak, moser 12 bolt with 4.10's,1LE DS,Hurst line lock, eibach drag launch kit and airbag, HAL 12 way adj struts,CE 3-way adj. shocks, 15x3.5 front and 15x8 rear Weld Draglites with 27x11.5x15 Hossier QTP's. 1.607 60ft 7.62 @ 89.62 mph 1/8 12.02 @ 110.48 mph on motor.
1.55 60ft 7.16 @ 96.04 mph 11.27 @ 118.41 mph (125 shot) Shooting for 10's
In memory of the greatest
#3 Dale Earnhardt The Intimidator

 

damn :P were upi at rockingham last night?

did bob get his car back together yet?

 

Congrats Randy. Any plans on moving to a 150 or 200 shot?

------------------
93 Z28: built a4, 3.73's, 58mm tb, slp headers/ypipe/straight pipe, borla catback, ram air, Vigilante, hypertech chip/thermo, stb, msd coil, bmr subframes lca's and relocators, manual iat, !km
best full pass on street tires (pre-tc): 13.177 @ 107.21 (2.064 60 ft)
best full 1/8 on streets (pre-tc): 8.44 @ 84.23
For Sale: http://clubwest.dyndns.org/
91 GSX: SOLD!! AWD/16G/M5/All the goodies.

 

Ya Rich, may move up to a 175, but that's it.

Randy