Any good LS1 shops in Fayetteville?
Thread Starter
Registered User
Joined: Jul 2002
Posts: 15
From: Fayettenam, N.C.
Any good LS1 shops in Fayetteville?
I'm moving to Fayetteville this fall. By then, I plan to have heads and a cam. Are there any good shops that know LS1's, unlike Columbia?
------------------
1999 Trans Am, pewter, A4, 3.23's
GM WS6 hood, Whisper lid, Whisper MAF ends, ASP pulley, Vig 3200, Borla exhaust, black powdercoat ZR1 rims 17x11 & 17x9.5, Kuhmo Supra 275's, Nitto Extreme drags 315's, Hotchiks aphr, Hotchiks stb
In my apartment: Jet Hot coated Hooker LT's w/ orp, TransGo shift kit, Granatelli lowering springs, Rototech rotors, hawk pads, Taylor 10.5 plug wires, TR6's. Not buying another damn thing till parts are installed!
------------------
1999 Trans Am, pewter, A4, 3.23's
GM WS6 hood, Whisper lid, Whisper MAF ends, ASP pulley, Vig 3200, Borla exhaust, black powdercoat ZR1 rims 17x11 & 17x9.5, Kuhmo Supra 275's, Nitto Extreme drags 315's, Hotchiks aphr, Hotchiks stb
In my apartment: Jet Hot coated Hooker LT's w/ orp, TransGo shift kit, Granatelli lowering springs, Rototech rotors, hawk pads, Taylor 10.5 plug wires, TR6's. Not buying another damn thing till parts are installed!
Registered User
Joined: Jul 2000
Posts: 49
From: Sumter, S.C. & Ft. Laud, FL
Mike,
I would give Bob Dalton a call. He does mostly LT1's as far as I know but if he can't do it he can surely point you in the right direction. There is a place around there where he gets his heads/intakes ported all the time so I know there are shops out there. If you want his number let me know. Mike
------------------
96SS/Z28
K&N Forced Air Induction, Hypertech 160 Thermostat,TR Ported MAF Ends, 1LE Elbow, 52mm AS&M Throttle Body, LT4 Intake, LT4 Heads, LT4 Knock Module, Hotcam, 1.6rr and springs, Taylor Pro Wires, MSD 6AL Ignition, FLP Long tube Headers, Borla Cat back Exhaust, Vigilante 2600 Torque Converter, Transgo/shift kit, 3:73 Gears, March Underdrive Pulley, Hotchkis Strut Tower Brace, Lower Control Arms, and Panhard Rod, Bilstien Shocks & Struts, RK "2 Drop Springs, Chrome "17 SS Rims, Chrome Alternator, Chrome Valve cover breather, LG Racing Pedals, White Gauge Faces, Baer cross drilled/slotted rotors and polished calipers, Rear slotted rotors, finally - Ed Wright programming...
http://fbodyeurope.org/gallery/13_DSC00170.JPG
I would give Bob Dalton a call. He does mostly LT1's as far as I know but if he can't do it he can surely point you in the right direction. There is a place around there where he gets his heads/intakes ported all the time so I know there are shops out there. If you want his number let me know. Mike
------------------
96SS/Z28
K&N Forced Air Induction, Hypertech 160 Thermostat,TR Ported MAF Ends, 1LE Elbow, 52mm AS&M Throttle Body, LT4 Intake, LT4 Heads, LT4 Knock Module, Hotcam, 1.6rr and springs, Taylor Pro Wires, MSD 6AL Ignition, FLP Long tube Headers, Borla Cat back Exhaust, Vigilante 2600 Torque Converter, Transgo/shift kit, 3:73 Gears, March Underdrive Pulley, Hotchkis Strut Tower Brace, Lower Control Arms, and Panhard Rod, Bilstien Shocks & Struts, RK "2 Drop Springs, Chrome "17 SS Rims, Chrome Alternator, Chrome Valve cover breather, LG Racing Pedals, White Gauge Faces, Baer cross drilled/slotted rotors and polished calipers, Rear slotted rotors, finally - Ed Wright programming...
http://fbodyeurope.org/gallery/13_DSC00170.JPG
Registered User
Joined: Mar 2002
Posts: 158
From: NEWPORT NEWS
Originally posted by 96SS#1469
Mike,
I would give Bob Dalton a call. He does mostly LT1's as far as I know but if he can't do it he can surely point you in the right direction. There is a place around there where he gets his heads/intakes ported all the time so I know there are shops out there. If you want his number let me know. Mike
------------------
96SS/Z28
K&N Forced Air Induction, Hypertech 160 Thermostat,TR Ported MAF Ends, 1LE Elbow, 52mm AS&M Throttle Body, LT4 Intake, LT4 Heads, LT4 Knock Module, Hotcam, 1.6rr and springs, Taylor Pro Wires, MSD 6AL Ignition, FLP Long tube Headers, Borla Cat back Exhaust, Vigilante 2600 Torque Converter, Transgo/shift kit, 3:73 Gears, March Underdrive Pulley, Hotchkis Strut Tower Brace, Lower Control Arms, and Panhard Rod, Bilstien Shocks & Struts, RK "2 Drop Springs, Chrome "17 SS Rims, Chrome Alternator, Chrome Valve cover breather, LG Racing Pedals, White Gauge Faces, Baer cross drilled/slotted rotors and polished calipers, Rear slotted rotors, finally - Ed Wright programming...
http://fbodyeurope.org/gallery/13_DSC00170.JPG
Mike,
I would give Bob Dalton a call. He does mostly LT1's as far as I know but if he can't do it he can surely point you in the right direction. There is a place around there where he gets his heads/intakes ported all the time so I know there are shops out there. If you want his number let me know. Mike
------------------
96SS/Z28
K&N Forced Air Induction, Hypertech 160 Thermostat,TR Ported MAF Ends, 1LE Elbow, 52mm AS&M Throttle Body, LT4 Intake, LT4 Heads, LT4 Knock Module, Hotcam, 1.6rr and springs, Taylor Pro Wires, MSD 6AL Ignition, FLP Long tube Headers, Borla Cat back Exhaust, Vigilante 2600 Torque Converter, Transgo/shift kit, 3:73 Gears, March Underdrive Pulley, Hotchkis Strut Tower Brace, Lower Control Arms, and Panhard Rod, Bilstien Shocks & Struts, RK "2 Drop Springs, Chrome "17 SS Rims, Chrome Alternator, Chrome Valve cover breather, LG Racing Pedals, White Gauge Faces, Baer cross drilled/slotted rotors and polished calipers, Rear slotted rotors, finally - Ed Wright programming...
http://fbodyeurope.org/gallery/13_DSC00170.JPG
SEE BOB'S RIDE HERE
B.D.R. @ A.P.E.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM