Drivetrain Clutch, Torque Converter, Transmission, Driveline, Axles, Rear Ends

Vibration Problems....HELP!!!

Thread Tools
 
Search this Thread
 
Old Jun 18, 2009 | 05:41 PM
  #1  
93BlackTA's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 391
From: Newfoundland, Canada
Vibration Problems....HELP!!!

I have a bad vibration in my car when i hit 100KM...it vibrates so bad that the passenger seat shakes and you can't look out the back window using the mirror..lol...I have a moser 9in in the rear with 3.89 gears, i have the stock driveshaft, and i have a spoohn adjustable torque arm that mounts to the floor not the tranmission tail housing. I have tried 2 different sets of tires on the rear of the car to eliminate the tires as the culprit. That made no difference.

Please throw any ideas my way as i have about a week to get this ironed out before i go on the dyno for tuning.

Thanks
Old Jun 21, 2009 | 07:14 PM
  #2  
93BlackTA's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 391
From: Newfoundland, Canada
ttt
Old Jun 21, 2009 | 09:21 PM
  #3  
TrybalRage's Avatar
Registered User
 
Joined: Jul 2007
Posts: 107
Are you sure it's coming from the rear?
Old Jun 22, 2009 | 04:38 AM
  #4  
93BlackTA's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 391
From: Newfoundland, Canada
well its from the center console back...and i know its not the rear tire/wheels as i tried another set that were just balanced.
Old Jun 22, 2009 | 05:24 AM
  #5  
Injuneer's Avatar
Administrator
 
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
What is the pinion angle set at?
Old Jun 22, 2009 | 05:28 AM
  #6  
93BlackTA's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 391
From: Newfoundland, Canada
I thought it was set at -2 but i checked it last night and i got 2 different readings....i checked it with just the rear axle jacked up and the front wheels on the ground and when i jacked it up more so i could actually squueze in then i got a different reading...If the pinnion angle was off would this cause a vibration at highway speeds....also seems like the rear suspension is binding when hitting a bump or its aweful tight...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
autoxr166
General 1967-2002 F-Body Tech
0
Sep 25, 2015 04:21 PM
ryanhilsgen
Drivetrain
9
Sep 21, 2015 07:34 PM
CamaroSS30thAnn
General 1967-2002 F-Body Tech
13
Sep 8, 2015 04:43 PM
RallyRed701/2
LT1 Based Engine Tech
3
Jul 20, 2015 11:18 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
Apr 16, 2015 09:57 AM




All times are GMT -5. The time now is 09:49 AM.