THis is for an 87 Z ....I mounted my tranny cooler....
here's how I have it..I did the inline install I just want to make sure I did it right..

I mounted the cooler in front of the AC on the front of the car. I removed the top connection on the radiator and ran the hose from top of rad to bottom of cooler...then the hard line that was disconected from the top rad I have that running to the top of the cooler..I never touched the bottom connection on the RAD.

correct?

Also after I mounted and fastened the cooler with the ties going thru tranny, AC and RAD......I notice now that I do another cam swap or have to remove one of them...I will have to cut the ties.......