T56 Swap in progress - need a little help on wiring
Thread Starter
Registered User
Joined: Aug 2006
Posts: 29
T56 Swap in progress - need a little help on wiring
I bought this reverse lockout pigtail and I've been reading and reading . I know that one wire goes to D6 on the pcm and the other wire goes to a switched 12V source.
http://cgi.ebay.com/ebaymotors/T56-R...Q5fAccessories
Which wire goes to D6 and which one to 12V?
Neutral safety switch. Where are the wires that have to be connected to the clutch pedal? I understand that polarity doesn't matter just need to know where the wires are coming from.
http://cgi.ebay.com/ebaymotors/T56-R...Q5fAccessories
Which wire goes to D6 and which one to 12V?
Neutral safety switch. Where are the wires that have to be connected to the clutch pedal? I understand that polarity doesn't matter just need to know where the wires are coming from.
Administrator
Joined: Nov 1998
Posts: 71,098
From: Hell was full so they sent me to NJ
Re: T56 Swap in progress - need a little help on wiring
Shoebox has the stock 95 LT1 wiring diagrams:
http://shbox.com/1/1995_pcm2.jpg
That shows pin "A" in the connector, with a light green wire connected to pin "D6". Pin "B" in the connector is a brown wire that runs to fuse #6 in the underhood box.
Your link shows "Item removed or no longer available".
http://shbox.com/1/1995_pcm2.jpg
That shows pin "A" in the connector, with a light green wire connected to pin "D6". Pin "B" in the connector is a brown wire that runs to fuse #6 in the underhood box.
Your link shows "Item removed or no longer available".
Thread
Thread Starter
Forum
Replies
Last Post
stockssn2o
Parts For Sale
14
May 25, 2015 08:54 AM
