i just installed a 3000 PI converter i bout over the net used for 250 and man it feels bad *** on the street with my 3.73 the rpm use to fal like around 3800 rpms after shifting now it falls around 4500 rpms right now before my stal my best has been a 13.4@104 with only moroso cia ,3.73's ,madz28 tune ,cats removed ,exhaust ,pulley what do yall think ill hit with the stall + ima add LT headers and 1.6 roller rockers + sticky tires of course

 

I would guess you would be in the very low 13s and high 12s consistently, probably even a little better then that.

 

You'll drop 3/10ths.

 

3/10ths... With a the addition of 3k stall, slicks, LTs and 1.6 RRs. Seems kinda low to me. Im with 2000GTP (yes yet again) You should see some high 12s low 13s (more then likely high 12s)

 

I vote high 12's too. He already ran 13.4 with it. The stall and tires will probably get him to 13 flat. Add headers and 1.6 rr's on top of that and i can see high 12s.

 

yup that was what i was thinking high 12's then do some weght reduction to get to the mid 12's and have a fast *** lt1

 

You'll do high 12's.

 

Javier97Z28 dropped from13.5 to 12.9 with a tune, a 2800 Vig and a few minor things like LT4 knock. Granted he is one hell of a driver, I think you will manage.

http://www.zmydust.com/myz28.html is Javiers site, and I think you will find his documentation really neat. The parts he added, and the times he ran with them.

 

hah! Speaking of which I need to update that page some, thanks

 

You need to check your PMs too Obi Wan I got more questions for you.

 

I haven't had any new PM's from ya since yesterday. I still need to get those pics, but it's pending sale again...

 

So whats the story have you run again yet? Whats the times?