I just bought this off of ebay:

http://64.4.26.250/cgi-bin/linkrd?_l...aEOAB%3aMT%3a6

The guy does not have any installation instructions. It is just a shortened stick, does anybody have the instructions to install?

 

dead link, should just be able to unscrew handle, slide off bag, unbolt old one, bolt old one, and but the bag and screw the handle back on

 

It is a lot like this
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2448005288

but I would like to have some directions if anybody does have them so I really do not screw it up

 

1. unscrew stock shift handle
2. open console and remove coin holder
3. remove two (2) 7mm bolts
4 lift up on console gently and free from remaining clips up front as well as unplug light in ashtray and the power outlet
5. remove two (2) bolts holding on stock stick and remove stock stick
6. install new short stick with the flat side to stock shifter. stick should be on the drivers side of the shifter. IF both sides are flat use the side that has a larger flat spot.
7. attach new bolts and tighten.
8. reassemble console in reverse
9. ENJOY

 

thanks!

 

Glad to help man

I've gotten tons of help from this board and it's nice to be able to contribute every so often