output speed loss
Thread Starter
Registered User
Joined: Nov 2002
Posts: 496
From: windsor,on
output speed loss
i'm stumped on trying to get my transmission to shift into 2nd under wot when at the strip.
the car is a 97 lt1, with a 4l60e built up with a shift kit and 4l65e parts and a vig3200 rpm stall. the car is converted to obd1.
yesterday the car left harder than ever, went 1.63, but the logs on datamaster show no vehicle speed and the car would just hit the limiter in 1st. once it hit the limiter 2 dtc codes for the transmission came up in datamaster, but no ses light on the dash. the codes where: 22 tps sensor low and 72 output speed loss. under wot the car reads 4.49v for the tps.
anyone have any ideas or suggestions, i'm lost.
the car is a 97 lt1, with a 4l60e built up with a shift kit and 4l65e parts and a vig3200 rpm stall. the car is converted to obd1.
yesterday the car left harder than ever, went 1.63, but the logs on datamaster show no vehicle speed and the car would just hit the limiter in 1st. once it hit the limiter 2 dtc codes for the transmission came up in datamaster, but no ses light on the dash. the codes where: 22 tps sensor low and 72 output speed loss. under wot the car reads 4.49v for the tps.
anyone have any ideas or suggestions, i'm lost.
Thread
Thread Starter
Forum
Replies
Last Post