Wondering what kind of aftermarket rear swaps you guys have made and how you optioned them. Moser, strange, Currie etc... 30 spline, 33 spline, type of yoke, C-clip elimination, gears. Stuff like that. And also how much did you spend. I'm ready to buy but theres a lot out there and don't know too many people that have made the swap to hit up for info. Thanks.

Ken R. 95Z

 

i got a moser 9". plane as can be,33 spline axles,no cclips,spool,3.70's,bolt in daytona pinion support,1350 billet yoke.......and i paid under $1800

 

RacingLT1, was that ready to bolt in (as far as sway bar mounting, brake mounting etc...)? How much more for an Eaton posi? Are your gears quiet or have a little whine? You have to modify your driveshaft? Thanks for the response.

Ken R 95z

 

never priced the eaton posi,wasnt interested in 1.
we did hae to make swaybar mounting brackets,but thats normal with all 9" rears.

this set of gear has a ery slight whine on decel,they were dead quite the first time they went in,then i swapped to 4.11's and it didnt work out so we put the 3.70's back in and picked up a very slight whine on decel. you can only hear it if the exhuast is capped and the radio is off.