Well I have had my fuddle p3000 for a couple months now, It is still working great, but it feels exactly like the stock converter. I did not see much of an increase in stall over the stock converter. It foot brakes to 1600 just like the stock stall, it flashes to around 2000 not much of an improvement over stock if you ask me. I was expeckting it to flash to atleast 2800 being a 3000?

 

Take it to the track and put it to the test!

I have had my 4K fuddle for a few years now and am able to cut 1.5X 60's N/A and 1.4X 60's on the jug.

 

I did go to the track check the sig.

 

Perhaps you should contact fuddle. There may just be some issue with that converter.

 

It should foot brake higher than that. Mine does. either way, talk to him. He'll make it right.

 

my 3200 only brakes to aqbout 2000....shouldent brake that high and if you arent sticking it wont flash to 3000

 

Foot braking is indeed a very poor way to measure stall. Your measure second hand through a gear ratio and how much the brakes hold