Dope Tranny Cooler Install
Thread Starter
Registered User
Joined: Dec 1999
Posts: 313
From: Ashland, KY, 41102
Dope Tranny Cooler Install
I have searched and found 1 pic and the webpage url that is dead. This is the pic
http://www.fbody.com/members/99CamaroSS/cooler3.jpg
What do you have to do to do this, cut out the vent part of the airdam? Can I do this without cutting that out by just getting some longer bolts, mounting it underneath the vent and inserting the bolts through the factory holes? I have looked at the other ways of doing this, say up by the FTRA duct, but have decided agaisnt that, leaving me this method. Thanks for any input!
http://www.fbody.com/members/99CamaroSS/cooler3.jpg
What do you have to do to do this, cut out the vent part of the airdam? Can I do this without cutting that out by just getting some longer bolts, mounting it underneath the vent and inserting the bolts through the factory holes? I have looked at the other ways of doing this, say up by the FTRA duct, but have decided agaisnt that, leaving me this method. Thanks for any input!
Thread
Thread Starter
Forum
Replies
Last Post
96z
Drag Racing Technique
27
Aug 2, 2002 09:00 PM