I am looking for a good clutch disc which sill hold around 425 rwhp which requires no breakin period. my motor is almost done and want to go to track before full exhaust is on.The pressure plate is an LT4

thx,
jonesy

 

If you dont want a break in, then your only option is an automatic tranny. The disc is a wear item that requires itself to establish a nice wear pattern if you will, for it to operate correctly. For that power level I'd look into a SPEC Stage III or a McLeod Street Twin. Or give the McLeod performance disc a shot. You'll only need the disc since you have the PP anyway. Not much else is going to hold up well at that point.

 

get a brass..6 puck,solid hub shouldnt take much break in