I couldn't really find a good answer for my problem so Im gonna make a post

I put a t56 in my 88 camaro. Basically a brand new t56, brand new flywheel, clutch,pressure plate, pilot bearing and the slave is fairly new.

Idk if this was doing it before and I didn't hear it because of open headers, but there is a squeal/squeaking noise that only does it when the clutch is not being touched. If I put a tad bit of pressure on the pedal it goes away. Trans shifts smooth and drives fine.

I'm thinking either something needs greased or slave needs bled or maybe adjust the slave somehow.

What are your thoughts?

It didn't do this before on my other engine.