Clutch Problem
Clutch Problem
My 97 with a McLoed Street Twin has been in storage for about 4 months. When I went to start it, ther was no clutch pressure at all. The clutch will not disengage and the pedal is completely limp.
Any suggestions?
Thanks
Tim
Any suggestions?
Thanks
Tim
It's going to be something to do with your Slave/Master cylinder. It's what creates the pressure on your pedal. If your pedal has no pressure it has to be faulty or disconnected. Make sure it's connected properly on both ends and if it is.. then it would be the first thing I replaced. You can buy just the end but I would suggest buying the whole unit from GM. If you buy just the end you will have to deal with bleeding the cylinder and it can be a pain to get right.
Thread
Thread Starter
Forum
Replies
Last Post



