my friend dropped my ending without disconnecting the slave cylinder from the bellhousing of the tranny. So basically it ripped the metal braided line from from the plastic plunger assembly... Well i fixed that by putting a new plunger on because that was damaged not the braided line...

i later pressed in the clutch with the car off and some fluid dripped down onto my foot.

THe clutch was hard to press down with the car off...

I forget if the clutch is always suppose to feel pretty easy to push in or when its off it gets harder...?

 

time to replace the master cylinder.

 

^ This guy is a been-there done-that ... Or he is fooling me. It sure sounds like a master though.

 

yeah definately time for a new master, im there right now, wel mine never squirted fluid at me but its drippin down a bit. and is really funy about how it goes in. mines bad enough i thought my new trans was already shot.. i was happy when i discovered i had almost no clutch fluid left lol.

 

clutch master cylinder

fun job

i hope you have thin girlish hands
i got so frustrated on my third gen i removed the steering column to change the master
4th gens are similar