Just wanted to post up a picture of this installed. I have not seen many and thought some of you would like to see it.
Thats a 93 to 97 TH400 crossmember.

 

cool now post what you had to do to make it all work you know the swap lol

 

Believe it or not it wasn,t that bad.
I bought a complete TH400 swap from one of the guys on the board so I got the Rossler TH400, Coan 4000 stall, B&M Hi Tek cooler with fan, and the Dennys Nitrous ready DS.
I picked up the crossmember because I wanted to keep the adjustable TA I already had.
I think the worst part was getting the second up driver side bellhousing bolt in. The JW ultrabell is alot thicker than a stock bellhousing so I had to coerce it a bit.
I have to loosen the bolts on the DS loop and lower it a bit to get the DS in and out but its not that big of a deal.
The whole deal really wasn,t any harder than changing out a 60E.
Of course I just finished it tonite, have not gotten a chance to drive it yet, I am sure some little bugs will have to be worked out.