i have a 97 ta with the following mods

as&m headers, corsa catback, obdi conversion, lt4 knock module, msd6al, vig 3200, 3.73 gears and bfg drag radials

i went to the track yesterday and logged a run with datamaster scanning both the engine and tranmission together. it would hit the rev limiter when shifting into 2nd. i'm also getting some spark retard too. bryan at pcmforless has put the obdi high stall fix in my program and already made a change to it as well

my best 60' was 1.704, but could only run a 13.17@102.33, when my best before the stall is in the sig on a stock converter

i can send the scan for anyone to look at, if they want it. i'm stuck on what to do, i was thinking about sending the stall back and have it restalled to a 2800.

thanks
steve

 

did you get your shift points changed when you did your gears?

 

yes, last year i had everything except for the stall and msd box. bryan did the program and everything was good.

 

ttt....anyone have any ideas, i'm kinda stuck with what to do

 

Were the track conditions similar?

 

not this weekend, but when i brought the car out in april to the track, when the conditions where similar, it ran the same and still smacked the limiter.