with a th 400 would a the stock shifter work? and also with a 3.42 gear ,26 tall tire at 75 mph what rpm would be turning thanks
steven gsx@hotmail.com w/4l60 60ft 1.91

and anybody from mobile, alabama?

 

i have done a searched and i still have no idea

 

my calculator, you might want to book mark it or something...

The answer BTW, is 3300 RPM's

 

Still no answer if the stock shifter would work? I don't think it will but I figured someone would answer this, or at least let me know and I will answer this question from this point on..

 

thanks ,thats helps me alot .any toughts about a shifter?
steven

 

not trying to take away from getting your question answered, but.. Why are you getting a 400, It can't be a race car if you are running 3.42's? so what is the need for the 400?

 

400s dont break easy like 4l60 w/all the good parts "i broke 3 to many in 8 months" long story pumps,z pack . i want a 4l80 but the comp.that ctrl. the trans it cost 1g. so i have to save up for awhile or go with the 400. the promble i had was my dial pins.Any ideas on a shifter?

thanks steven gsx@hotmail.com

 

 

any shifter ideas? anybody?
thanks steven gsx@hotmail.com 1971 buick gsx stage1 11.28
1967 buick gs 400 ?
1995 z28 12.85

 

A lot of people who swap in the TH400 opt for a full manual, reverse pattern valve body, then throw on an aftermarket shifter. It can be done with the stock console.... I just saw pictures posted on another forum of a B&M Pro-Ratchet in an A4 console. I have the same shifter in a stock M6 console.

Street driving:
http://cjcfo.fbody.com/members/injun.../DCP03460a.jpg

Track:
http://cjcfo.fbody.com/members/injun.../DCP04239a.jpg

 

Hey Fred - Do you remember the forum that you saw that pic? I'll be installing a Hurst Quarter stick in my A4 console this week and have been looking to get some ideas . . . otherwise I was going to get an M6 console.

Thanks,
Pete

 

http://www.fbody.com/cgi-bin/lt1/read.cgi?msgid=236418

 

Thanks a lot Fred . . . I appreciate it.