want something with good street manners what do you guys recommend?

thanks

 

Depends where the cam makes decent low end torque.

 

I like my 3600 Edge. Had a 3000 but 3600 is more fun.

 

ohh i see mystery bird but i just got few bolt on's on my car.......

so was doing some research and most of the people go 3000 to a 3600?? stall but im not sure so 3200 is good is the 3600 to big??

 

I had mine recently reconfigured from 3000 to 3600 and don't notice a difference when driving normal, but when at the track or hit it hard on the street then it's a nice difference. A good quality converter will act like stock with normal driving. Don't get a cheap one and don't bother with anything below 3000.

 

since we don't know anything about your car,other than 3.73s',difficult to answer.
what are intended uses ?

 

In a PM he told me the engine is stock "just headers n exhaus".

3,200 would seem reasonable.

 

just want to do the botl ons cuz theres a lot off mustangs out here.?
well the mods im doing on the car

3.73s
160 trehmostat....n tune
tb??

 

Don't even waist your money on a bigger throttle body, you'll be no where near maxing it out with bolt-ons. FWIW, I put the stock TB back on my car one day at the track and was still able to run 11's.

 

^^^agree,you'd need intake,cam,& heads to benefit from a larger OEM or aftermarket TB.

 

ooh ok thanks guys..

any tips on the stall?

 

I love my Edge racing, service is fantastic.

 

what's your price range ?

 

well im willing to pay the cost of a good stall.....

 

Yank SS 3600, hands down. This has been said before.