2000 Z28 throwing code P1860
05-21-2016, 12:14 PM
#1
Registered User
Thread Starter
Join Date: May 2016
Location: PA
Posts: 31
2000 Z28 throwing code P1860
Looking at a 2000 Z28 and it has an issues that I wanted to get some insight on before pulling the trigger.
It's throwing code P1860. He says he replaced the TCC solenoid as the converter was unlocking at highway speeds. That fixed that problem, but he's had the CE light on for that code since then. What are the most likely culprits for this?
It's throwing code P1860. He says he replaced the TCC solenoid as the converter was unlocking at highway speeds. That fixed that problem, but he's had the CE light on for that code since then. What are the most likely culprits for this?
05-21-2016, 02:57 PM
#2
Administrator
Join Date: Nov 1998
Location: Hell was full so they sent me to NJ
Posts: 70,646
Re: 2000 Z28 throwing code P1860
Generally not a good idea to post a topic in more than one forum. Causes confusion.
https://www.camaroz28.com/forums/gen...5/#post6986593
https://www.camaroz28.com/forums/gen...5/#post6986593
Thread
Thread Starter
Forum
Replies
Last Post
jasonduaine
Suspension, Chassis, and Brakes
2
06-04-2015 09:29 AM