Anyone run one?
Skip

 

I have been running a TCI 10" 3600 and have not had any problems with it.

 

I am running a 8" in my turbo 350 and have had no problems in the 5yrs that i have ran it. I also have a 8" for a glide that i used to run and will be running it again, when i get the brake done for the powerglid.in the 9plus years that i have ran TCI converters i have had no problems. good luck

Steve

 

2nd tci here and i love it


South Carolina F&Y bodies
http://pub21.ezboard.com/bscfyb

 

i had a tci converter on my th-400 and it held up real nice and i would definetly buy another converter from them, they seem too be cheaper than many other brands and better than quite a few brands.

 

Yea, I have a TCI Streetfighter and just the other day the SOB wouldn't lock up right. Tried a tranny fluid change, some type of non-slip additive, PCM reprogram..... nothing worked. I put the stocker back in and the shop took a hack at the TCI. Found the lining that rubs together in the converter to make it lock up was shot. So too is the converter now.

~John

 

i have a TCI 9" 4200-4500 stall in my car. It cut a 1.74 60" time last night on the way to 12.8@104 so it hits pretty hard. It is being replaced only because i found a used yank 3000